Marijuana Packaging and Labeling in Washington

What Are The Specific Packaging And Labeling Requirements For Marijuana Products in Washington?

The Washington State Liquor and Cannabis Board (WSLCB) has established specific packaging and labeling requirements for marijuana products, including flower, pre-rolls, edibles, and concentrates produced, processed, or sold in the state of Washington. The regulations are designed to ensure the safety of the public by providing clear information about the product’s identity, potency, and origin.

All marijuana products must be packaged in opaque, child-resistant containers that clearly indicate the strain name, as well as the date of harvest and test results. In addition, the label must include the name and address of the producer, a list of all ingredients, and a warning label.

Edibles must be packaged and labeled with a clearly visible THC content statement; all edible products containing more than 5 mg of THC must be divided into serving sizes no larger than 10 mg of THC.

The labels for all marijuana products must also feature a stamp issued by the Washington State Department of Agriculture to certify that the product has been tested for potency, contaminants, and other quality-control standards.

All products must comply with the Washington State Advertising Rules, which include restrictions on advertising in public locations such as billboards and vehicles.

Are There Rules Regarding Child-Resistant Packaging For Marijuana Products in Washington?

Yes, there are rules regarding child-resistant packaging for marijuana products in Washington. Marijuana products must be sold in a child-resistant package that is designed or constructed to be significantly difficult for children under five years of age to open and not difficult for normal adults to use properly.

What Information Must Be Included On The Label Of A Marijuana Product in Washington?

1. The name and address of the producer.
2. The date of harvest.
3. The net weight of the product.
4. A statement that the product contains marijuana.
5. The potency of THC and CBD in the product.
6. A list of any other ingredients or additives in the product, including solvents and carrier oils.
7. Any warnings or cautionary statements applicable to the product.
8. Information required by Washington’s Department of Health, such as product lot numbers, registration numbers, and a warning that the product is for adults 21 and over.

Are There Size And Design Specifications For Marijuana Product Labels in Washington?

Yes, there are size and design specifications for marijuana product labels in Washington. All marijuana product labels must include the product name, the Washington State Liquor and Cannabis Board (WSLCB) number, the quantity of marijuana in the product, the source of the marijuana, the name of the licensee who produced and/or packaged the product, a symbol that indicates the product is not for sale to people under 21 years old, and any required warnings or health statements. The label must also include a Washington State Cannabis Tax stamp. The labels must be a minimum size of 2 inches by 2 inches. All font must be 10 point or larger and the text must be easily read from a distance of 12 inches or more.

How Are Dosing Instructions Provided On Packaging And Labels For Edibles And Other Products in Washington?

Dosing instructions for edibles and other products are provided on the packaging and labels in Washington in a few ways. The most common way is to show the amount of THC or CBD in milligrams per serving, or per unit of the product. This information is usually printed on the front or back of the package, and will include the recommended dose for adults. In addition to this, some products will include a dosing guide with clear instructions on how to consume the product safely and effectively. Finally, some companies may provide additional information on their websites or through other materials to help customers understand dosing instructions for their edibles or other products.

Are There Requirements For Including Warnings And Health-Related Information On Labels in Washington?

Yes, the Washington State Department of Agriculture requires food manufacturers to include warnings and health-related information on labels. The requirements are based on the U.S. Food and Drug Administration’s labeling regulations. In addition, Washington has a specific law that requires warnings on products that contain mercury, lead, or other toxic substances. Labels must also include nutrition facts, an ingredients list, and allergen information.

Do Labeling Regulations Differ Between Medical And Recreational Marijuana Products in Washington?

Yes, labeling regulations do differ between medical and recreational marijuana products in Washington. For instance, products used for medical purposes must include specific warnings and product information. Recreational marijuana products are required to include the producer’s name, address, and license number as well as the percentage of THC and CBD. In addition, all recreational products must contain a warning label that states: “This product can impair concentration, coordination, and judgement. Do not operate a vehicle or machinery under the influence of this drug.”

What Are The Rules For Labeling Marijuana Products With Regard To Thc And Cbd Content in Washington?

In Washington, it is illegal to label marijuana products with regard to THC and CBD content. The state requires that all marijuana products be labeled according to the following guidelines:

• Unprocessed marijuana flowers, leaves, and other usable parts must clearly state on the label: “This product contains marijuana and may contain THC.”

• Concentrated THC/CBD extracts, tinctures, and other infused products must indicate the total amount of THC and CBD on the label.

• Edible products must include the following information: “This product contains marijuana and may contain THC or CBD.”

• Marijuana products must also include warnings about the potential risks associated with THC or CBD use.

Are There Specific Requirements For Labeling And Packaging Of Marijuana Concentrates in Washington?

Yes, there are specific requirements for labeling and packaging of marijuana concentrates in Washington. The Washington State Liquor and Cannabis Board requires that all marijuana concentrates be labeled and packaged according to the standards outlined in the WSLCB’s Packaging and Labeling Guide. This guide outlines requirements for product information, product warnings, product testing information, product symbols, and tamper-evident packaging. Additionally, marijuana concentrates must have a label that contains information such as the licensee’s name and address, a product name, a list of all ingredients, a net weight, the license number of the producer/processor, an expiration date, a list of any potential allergens contained in the product, and any warnings or other pertinent information necessary for the consumer.

What Symbols Or Icons Must Be Used To Indicate Thc Content, Child Resistance, Or Other Key Information in Washington?

In Washington, the icons or symbols used to indicate THC content, child resistance, or other key information are regulated by the Washington State Liquor and Cannabis Board. These symbols must appear on all cannabis product packaging, including containers, labels, bags, or wrappers. Specifically, these symbols include a THC symbol (a cannabis flower with a circle around it), a child resistant symbol (a circle enclosing a “C” and an “R”), and a symbol indicating that the product contains more than 0.3% of THC (the letter “T” in a diamond). In addition, labels and packaging must include warnings for any cannabinoid-infused products.

Do Labels Need To Include The Results Of Laboratory Testing For Potency And Contaminants in Washington?

Yes, labels must include the results of laboratory testing for potency and contaminants in Washington. All marijuana products must be tested for potency and contaminants by a state-licensed laboratory before it can be sold or given away. The laboratory results must appear on the product label. The label must also include the name and address of the licensed producer or processor, a batch number, and a list of all ingredients used in the product.

How Are Marijuana Packaging And Labeling Violations Enforced, And What Are The Penalties in Washington?

In Washington, marijuana packaging and labeling violations are enforced by the Washington State Liquor and Cannabis Board (LCB). If found in violation of the packaging and labeling laws, a licensed marijuana processor or producer could face a suspension or revocation of their license, a civil penalty of up to $10,000 per violation, or both. The LCB may also take corrective action against a violations, including requiring an appropriate repackaging or relabeling of products. All civil penalties are subject to review by the Washington State Board of Tax Appeals.

Is There A Mechanism For Consumers To Report Labeling Discrepancies Or Concerns in Washington?

Yes. Consumers in Washington can report labeling discrepancies or concerns related to food products to the Department of Agriculture by submitting a complaint form through the department’s website. The form requires consumers to provide the product name, the date of purchase, the store, and a description of the discrepancy or concern. Consumers can also contact the Department of Agriculture directly via telephone for more information.

Do Marijuana Product Labels Need To Include Information About Responsible Consumption in Washington?

Yes, marijuana product labels in Washington must include information about responsible consumption, as mandated by the Washington State Liquor and Cannabis Board (WSLCB). The WSLCB requires that all marijuana product labels must include information about the effects of the product, the potential for addiction and misuse, and responsible consumption instructions.

Are There Restrictions On Marketing Claims Or Representations On Product Labels in Washington?

Yes, there are restrictions on marketing claims or representations on product labels in Washington. According to the Washington State Department of Agriculture, product labels must accurately and honestly describe the contents of a package and must not be misleading or deceptive. Labels must include accurate and truthful net weight or volume statements, as well as the name and address of the manufacturer, packer, or distributor. Additionally, all claims made on labels must adequately substantiate any claims made about the product’s features, performance, ingredients, and nutritional content.

What Are The Rules For Labeling And Packaging Of Pre-Rolled Joints And Other Smokable Products in Washington?

The rules and regulations for labeling and packaging of pre-rolled joints and other smokable products in Washington are governed by the Washington State Liquor and Cannabis Board (WSLCB). All labels must include the following information:

1. The business name of the producer, processor, or retailer.
2. The Washington State marijuana license number of the producer, processor, or retailer.
3. A list of all ingredients, including any additives or extracts.
4. A warning statement that the product is intended for use only by adults 21 years of age or older.
5. The amount of THC, Delta-9 THC, CBD, and/or other cannabinoids present in the product.
6. The net weight of the product.
7. The date the product was produced and its expiration date.
8. Any applicable health warnings.
9. The Universal Symbol for Cannabis Products (a green triangle with an exclamation point inside).
10. A statement that the product has not been evaluated by the FDA.

Is There A System For Tracking And Tracing Marijuana Products From Cultivation To Sale Via Labels in Washington?

Yes, there is a system for tracking and tracing marijuana products from cultivation to sale via labels in Washington. The system is called the Cannabis Traceability System (CTS) and is operated by the Washington State Liquor and Cannabis Board (WSLCB). The CTS tracks cannabis products from seed-to-sale in real-time, helping to ensure compliance with state laws regulating the production, sale, and distribution of marijuana. All marijuana products produced and sold in Washington must be labeled with a unique identifier that is tracked by the CTS, allowing for the traceability of each product from its origin to its final sale.

Are There Any Labeling Requirements Specific To Hemp-Derived Cbd Products in Washington?

Yes, there are labeling requirements that are specific to hemp-derived CBD products in Washington. These include:

• The product must be labeled to indicate that it contains hemp extract or a derivative of hemp, such as CBD, and the amount of hemp or CBD contained in the product must also be listed.

• The product must also include the origin of the hemp, as well as the name and address of the manufacturer.

• The product must also provide information regarding any potential allergens, as well as a list of ingredients and a statement of any health claims made about the product.

• In addition, all products must include a disclaimer stating that the product is not intended to diagnose, treat, cure or prevent any disease.

How Do State Regulations Address Multistate Or National Brands Regarding Packaging And Labeling in Washington?

Washington’s regulations regarding packaging and labeling of multistate or national brands regulate the labeling of their products through the Department of Agriculture’s Food Safety Program. This includes the labeling of all food products, including dairy products, foods prepared for human consumption, and meats. Labeling is required to include detailed information such as the product’s name, net weight, ingredients, and nutritional values. Additionally, the Washington State Department of Health provides requirements for the labeling of cannabis products sold in Washington State. These include information related to THC content, product warnings, distributor information, and testing standards. Lastly, The Alcohol and Tobacco Tax and Trade Bureau has a set of regulations related to the labeling and packaging requirements for alcoholic beverages. These regulations are intended to ensure that consumers receive accurate and appropriate information about their alcoholic beverage purchases.

What Resources Are Available To Help Businesses And Consumers Understand And Comply With Packaging And Labeling Requirements in Washington?

1. Washington State Department of Ecology: The Washington State Department of Ecology provides information and resources for businesses and consumers in the state on packaging and labeling requirements. This includes information on hazardous materials, requirements for labeling and packaging, and resources for businesses to increase their understanding on the subject.

2. Washington State Retail Association: The Washington State Retail Association’s website provides information on packaging and labeling requirements for businesses in the state. This includes guides on how to comply with requirements, as well as helpful resources and information on best packaging practices.

3. Consumer Product Safety Commission: The Consumer Product Safety Commission’s website provides information on packaging and labeling requirements for consumers in Washington. Consumers can find information on labeling and packaging laws, as well as product safety guidelines.

4. US Small Business Administration: The US Small Business Administration offers multiple resources to businesses in the state regarding packaging and labeling requirements, including information on hazardous materials, labeling laws, and best practices for compliant packaging. They also provide resources for businesses to increase their understanding of the regulations.