Fire Safety Codes in Arkansas

1. What are the key regulations and requirements outlined in the Arkansas Fire Prevention Code?

The Arkansas Fire Prevention Code outlines several key regulations and requirements to ensure fire safety in the state. Some of the most important provisions include:

1. Building design and construction requirements: The code specifies standards for the construction, renovation, and occupancy of buildings to mitigate fire hazards and ensure adequate means of egress in case of emergencies.

2. Fire protection systems: Regulations regarding the installation, maintenance, and regular testing of fire protection systems such as fire alarms, sprinklers, and extinguishers are outlined in the code to ensure their proper functioning in the event of a fire.

3. Hazardous materials storage: The code addresses the safe storage and handling of hazardous materials in facilities to minimize the risk of fire incidents and protect both occupants and emergency responders.

4. Emergency planning and drills: Property owners are required to develop and implement emergency response plans, conduct regular fire drills, and provide education and training to occupants on fire safety procedures.

5. Enforcement and inspections: The code establishes protocols for fire department inspections, permits, and enforcement actions to ensure compliance with the regulations and address any violations promptly.

Overall, the Arkansas Fire Prevention Code plays a crucial role in safeguarding lives and property from the threat of fire by establishing comprehensive safety measures and requirements that promote fire prevention and preparedness.

2. How often are buildings required to undergo fire inspections in Arkansas?

In Arkansas, buildings are typically required to undergo fire inspections on a regular basis to ensure compliance with fire safety codes and regulations. The frequency of these inspections can vary depending on the type of building and its use, as well as local ordinances. However, as a general guideline, commercial buildings in Arkansas are usually inspected annually to check for fire hazards and ensure that the necessary fire safety measures are in place. This includes checking fire alarms, sprinkler systems, emergency exits, and other fire protection systems to ensure they are working properly and up to code. Residential buildings may have different inspection schedules, typically ranging from every 1 to 3 years, depending on the size and type of the building. It is important for building owners and managers to stay informed about the specific requirements in their area to ensure compliance and protect occupants from fire hazards.

3. What are the specific requirements for fire alarm systems in commercial buildings in Arkansas?

In commercial buildings in Arkansas, fire alarm systems must comply with the National Fire Alarm and Signaling Code (NFPA 72), as adopted by the Arkansas Fire Prevention Code. Specific requirements for fire alarm systems in commercial buildings include:

1. Detection Devices: Installation of smoke detectors, heat detectors, and other approved detection devices throughout the building in accordance with NFPA 72.

2. Notification Appliances: Placement of audible and visual notification appliances such as horns, strobes, and speakers to alert occupants of a fire or emergency.

3. Control Panel: Installation of a fire alarm control panel that monitors all detection devices and notification appliances, providing a centralized location for system operation and monitoring.

4. Monitoring: Connection of the fire alarm system to a monitoring service capable of notifying the fire department in case of an alarm activation.

5. Testing and Maintenance: Regular testing and maintenance of the fire alarm system in accordance with NFPA 72 and the manufacturer’s recommendations.

It is essential for commercial building owners and operators in Arkansas to ensure that their fire alarm systems meet these specific requirements to provide early detection and warning in the event of a fire, helping to protect lives and property.

4. Can you provide an overview of the fire sprinkler system requirements in Arkansas?

In Arkansas, fire sprinkler system requirements are established by the state’s fire safety codes and regulations. These requirements typically adhere to the National Fire Protection Association (NFPA) standards, such as NFPA 13 for the installation of sprinkler systems in both residential and commercial buildings.

1. In Arkansas, new construction projects or major renovations may be required to install fire sprinkler systems to help protect against fire hazards.
2. The specific requirements for fire sprinkler systems in Arkansas may vary depending on the type and occupancy of the building. For example, high-rise buildings, healthcare facilities, and educational institutions may have more stringent requirements for sprinkler systems.
3. Maintenance and inspection of fire sprinkler systems are also crucial in Arkansas to ensure they are functioning properly in case of a fire emergency. Regular inspections by certified professionals are typically required to comply with state regulations.
4. Building owners and developers in Arkansas should consult with local fire departments or fire safety experts to ensure that their fire sprinkler systems meet all the necessary requirements and standards to enhance the overall safety of the building and its occupants.

5. What are the regulations regarding fire extinguishers in Arkansas buildings?

In Arkansas, fire extinguishers are required in many buildings to ensure the safety of occupants in case of a fire emergency. The regulations regarding fire extinguishers in Arkansas buildings generally follow the guidelines set by the National Fire Protection Association (NFPA) and the state’s fire safety codes. Here are some key regulations that are commonly enforced:

1. Type and Placement: Fire extinguishers must be the appropriate type for the potential fire risks present in the building, such as Class A, B, C, or a combination. They must also be placed in easily accessible locations where they can be readily grabbed in case of a fire.

2. Number of Fire Extinguishers: The quantity of fire extinguishers required in a building typically depends on factors such as the size of the building, occupancy load, and fire hazards present. Buildings with higher risks may require more extinguishers to be installed.

3. Maintenance and Inspections: All fire extinguishers must be regularly inspected, tested, and maintained in accordance with NFPA standards. This includes monthly visual inspections, annual maintenance by a qualified professional, and periodic hydrostatic testing.

4. Training: Building occupants should be trained on the proper and safe use of fire extinguishers. This training should cover the different classes of fires, how to operate an extinguisher, when to use it, and when to evacuate and call the fire department.

5. Compliance: Building owners and managers are responsible for ensuring that their properties meet the required fire extinguisher regulations. Failure to comply with these regulations can result in fines, penalties, or even legal consequences in the event of a fire-related incident.

Overall, it is essential for building owners and managers to stay informed about the specific fire extinguisher regulations in Arkansas and ensure that their properties are in compliance to protect occupants and property from the risks of fire.

6. Are there any specific requirements for emergency lighting in Arkansas buildings?

Yes, there are specific requirements for emergency lighting in Arkansas buildings as outlined in the Arkansas Fire Prevention Code. These requirements are crucial for ensuring the safety of building occupants in the event of a power outage or emergency situation. Some key points regarding emergency lighting regulations in Arkansas include:

1. Illumination Levels: Emergency lighting systems must provide adequate illumination to allow for safe evacuation of the building during an emergency. This includes ensuring that exit routes, stairwells, and other critical areas are properly illuminated.

2. Power Source: Emergency lighting systems in Arkansas buildings are required to have a backup power source to ensure continued operation in the event of a power failure.

3. Testing and Maintenance: Regular testing and maintenance of emergency lighting systems are essential to ensure their proper functioning when needed. The Arkansas Fire Prevention Code may specify the frequency of testing and maintenance requirements.

4. Exit Signs: In addition to emergency lighting, exit signs must also be properly illuminated and maintained to guide building occupants to safety during an emergency.

Overall, compliance with specific requirements for emergency lighting in Arkansas buildings is essential to enhance the safety and readiness of occupants in the event of a fire or other emergency situation. Building owners and managers should familiarize themselves with the Arkansas Fire Prevention Code to ensure that their emergency lighting systems meet the necessary standards for safety and compliance.

7. How are occupancy limits determined in Arkansas buildings based on fire safety codes?

In Arkansas, the determination of occupancy limits in buildings is based on fire safety codes such as the International Building Code (IBC) and the Life Safety Code (NFPA 101). These codes provide guidelines for establishing the maximum number of occupants allowed in a specific space, taking into consideration factors such as the size of the area, the number and width of exits, and the potential fire hazards present.

1. The first step in determining occupancy limits is to classify the building based on its use and occupancy type. Different occupancy classifications have specific requirements for maximum occupancy limits to ensure the safety of occupants in the event of a fire.

2. The next consideration is the occupant load factor, which is based on the square footage of the space and the intended use of the area. This factor helps to determine the number of occupants that can safely occupy the space at any given time.

3. Egress requirements are also a critical factor in determining occupancy limits. The number and width of exits, as well as the distance to exits from any point within the space, are carefully evaluated to ensure that occupants can evacuate quickly and safely in the event of a fire.

4. Fire protection measures such as sprinkler systems, fire alarms, and emergency lighting are taken into account when determining occupancy limits. Buildings with adequate fire protection features may be allowed a higher occupancy limit than those without such measures in place.

5. Regular inspections and compliance with fire safety codes are essential to ensure that occupancy limits are adhered to and that the safety of building occupants is prioritized. Failure to comply with occupancy limits can pose serious risks in the event of a fire and may result in fines or penalties for building owners.

Overall, the determination of occupancy limits in Arkansas buildings is a multifaceted process that takes into account various factors to ensure the safety of occupants in the event of a fire. By following the guidelines set forth in fire safety codes and conducting regular inspections, building owners can help to prevent overcrowding and maintain a safe environment for all occupants.

8. What are the regulations for fire drills and evacuation procedures in Arkansas buildings?

In Arkansas, fire drills and evacuation procedures are crucial elements of fire safety protocols in buildings, ensuring the safety of occupants in the event of a fire emergency. The specific regulations for fire drills and evacuation procedures in Arkansas buildings are outlined in the Arkansas Fire Safety Code. These regulations typically include the following key requirements:

1. Regular Fire Drills: Buildings are required to conduct regular fire drills to familiarize occupants with evacuation procedures and ensure they know how to respond in case of a fire. The frequency of these drills may vary depending on the type of building and occupancy.

2. Emergency Evacuation Plans: Buildings are required to have written emergency evacuation plans that outline procedures for evacuating the building in case of a fire emergency. These plans should include designated escape routes, assembly points, and the responsibilities of staff members during an evacuation.

3. Notification Systems: Buildings must have effective fire alarm and notification systems in place to alert occupants of a fire emergency and initiate the evacuation process. These systems should be regularly tested to ensure they are in proper working condition.

4. Accessibility Requirements: Evacuation procedures should take into account the needs of individuals with disabilities or mobility impairments, ensuring they have access to safe and inclusive evacuation routes.

5. Training and Education: Building occupants should receive training on fire safety procedures and evacuation protocols to ensure they are prepared to respond effectively in an emergency situation.

It is important for building owners and managers to familiarize themselves with the specific regulations outlined in the Arkansas Fire Safety Code and ensure that they are in compliance to promote a safe environment for occupants in the event of a fire emergency.

9. How are fire causes investigated in Arkansas buildings in the event of a fire incident?

In Arkansas, fire causes are investigated in buildings following a fire incident through a structured and comprehensive process conducted by trained professionals. The investigation typically involves the following steps:

1. Scene Assessment: Upon arrival at the scene, investigators assess the overall situation, looking at the extent of the fire damage and collecting initial observations.

2. Evidence Collection: Investigators collect physical evidence from the fire scene, such as debris samples, photographs, and witness statements, to reconstruct the sequence of events leading to the fire.

3. Interviews: Investigators interview witnesses, occupants, and first responders to gather information about the fire’s origin, spread, and potential ignition sources.

4. Fire Pattern Analysis: Through the examination of burn patterns, debris distribution, and structural damage, investigators analyze how the fire progressed within the building.

5. Documentation: Detailed documentation of the investigation findings is crucial, including photographs, sketches, and written reports that may be used for legal and insurance purposes.

6. Cause Determination: Based on the collected evidence and analysis, investigators determine the most probable cause of the fire, whether it be accidental, intentional, or due to a specific fire hazard within the building.

7. Reporting: A final investigative report is prepared summarizing the findings and conclusions of the investigation. This report may be used for future reference and potential legal proceedings.

Overall, the investigation of fire causes in Arkansas buildings is a meticulous process that aims to identify the root cause of the incident, prevent future occurrences, and ensure the safety of occupants and properties.

10. Can you explain the requirements for fire doors and fire-rated construction materials in Arkansas buildings?

In Arkansas, the requirements for fire doors and fire-rated construction materials are crucial in ensuring the safety of occupants and minimizing the spread of fire in buildings. Here are some key points to consider:

1. Fire doors: Fire doors are designed to prevent the spread of fire and smoke within a building. In Arkansas, fire doors must meet specific standards set by the National Fire Protection Association (NFPA) and be tested and labeled by recognized testing laboratories, such as Underwriters Laboratories (UL).

2. Fire-rated construction materials: In Arkansas, buildings are required to use fire-rated construction materials in certain areas to enhance fire resistance. These materials are tested and rated based on their ability to withstand fire for a specified period, such as 1 hour, 2 hours, or more, depending on the building code requirements.

3. Building codes: Arkansas adopts the International Building Code (IBC) and International Fire Code (IFC), which provide guidelines for the installation of fire doors and the use of fire-rated construction materials. It is essential for building owners, contractors, and designers to comply with these codes to ensure the safety and well-being of building occupants.

4. Maintenance: Regular inspection and maintenance of fire doors and fire-rated construction materials are essential to ensure their functionality in the event of a fire. Building owners should establish a maintenance schedule and promptly address any issues to maintain compliance with fire safety regulations.

5. Enforcement: Local building departments and fire marshals are responsible for enforcing fire safety codes, including the requirements for fire doors and fire-rated construction materials. Non-compliance can result in penalties, fines, or even the closure of the building until the necessary corrections are made.

Overall, following the requirements for fire doors and fire-rated construction materials in Arkansas buildings is critical for fire safety and building code compliance. By understanding and adhering to these regulations, building owners can create a safer environment for occupants and reduce the potential impact of fires.

11. What are the regulations for storage of flammable materials in Arkansas buildings?

In Arkansas, the regulations for the storage of flammable materials in buildings are specified under the Arkansas Fire Prevention Code. Here are the key points related to storing flammable materials in buildings in Arkansas:

1. Flammable materials must be stored in designated areas that comply with the fire code regulations to prevent potential hazards.

2. The storage areas must be well-ventilated to disperse any fumes that may accumulate from the flammable materials.

3. It is important to ensure that the storage areas are not overcrowded and that there is sufficient space between the stored items to prevent the risk of fire spreading quickly.

4. Flammable materials should be stored away from sources of ignition such as open flames, electrical equipment, and other heat sources.

5. Proper signage indicating the presence of flammable materials should be posted in visible locations to alert individuals to potential risks.

6. Regular inspections of the storage areas should be conducted to check for any leaks, spills, or other hazards that could lead to a fire.

7. Employees handling flammable materials should be trained in proper storage procedures and emergency response protocols in case of a fire or spill.

By adhering to these regulations and guidelines set forth in the Arkansas Fire Prevention Code, property owners and managers can help ensure the safety of occupants and reduce the risk of fire incidents related to the storage of flammable materials in buildings within the state.

12. Are there specific requirements for smoke detectors and carbon monoxide detectors in Arkansas buildings?

Yes, there are specific requirements for smoke detectors and carbon monoxide detectors in Arkansas buildings. In Arkansas, the law requires that all residential buildings, including single-family homes, duplexes, and multifamily dwellings, have smoke detectors installed. These smoke detectors must be placed outside each sleeping area and on each level of the home, including the basement. Additionally, all newly constructed residential buildings must have carbon monoxide detectors installed outside each sleeping area if they contain fuel-burning appliances or have an attached garage.

For commercial buildings in Arkansas, the regulations regarding smoke detectors and carbon monoxide detectors may vary depending on the occupancy classification and size of the building. It is important for building owners and property managers to consult the Arkansas fire code and building regulations to ensure compliance with specific requirements for smoke and carbon monoxide detection systems in commercial properties.

13. How are fire safety systems integrated with building security systems in Arkansas buildings?

In Arkansas buildings, fire safety systems are typically integrated with building security systems to ensure comprehensive protection and response capabilities.

1. Integration of fire alarm systems with security systems allows for centralized monitoring and control, enabling quick identification and response to any emergencies or incidents.
2. Access control systems can be linked with fire alarm systems to restrict access to certain areas during fire alarms and ensure the safe evacuation of the building.
3. Video surveillance systems can also be integrated with fire alarm systems to provide real-time visuals of the situation to both responders and building occupants.

Overall, the integration of fire safety systems with building security systems in Arkansas buildings enhances overall safety and security measures, ensuring a more coordinated and effective response to emergencies.

14. Are there requirements for fire safety plans and documentation in Arkansas buildings?

Yes, there are requirements for fire safety plans and documentation in Arkansas buildings. The Arkansas Fire Prevention Code, which is based on the International Fire Code, mandates that certain types of buildings must have a fire safety plan in place. These plans typically include emergency procedures, evacuation routes, fire detection and suppression systems, and training requirements for building occupants. The fire safety plan must be well-documented and easily accessible to employees and emergency responders.

1. The fire safety plan should outline the responsibilities of key personnel during a fire emergency, including designated fire wardens or evacuation coordinators.

2. Documentation related to fire safety measures, such as inspection and maintenance records for fire alarms, sprinkler systems, and fire extinguishers, must be kept up-to-date and readily available for review by authorities.

3. It is essential for building owners and managers to ensure that their fire safety plans comply with Arkansas state regulations to protect occupants and property in the event of a fire. Failure to have an adequate fire safety plan in place can result in fines or other penalties.

15. Can you provide information on the training requirements for building occupants in Arkansas regarding fire safety?

In Arkansas, building occupants are not typically required to undergo specific training programs for fire safety. However, it is strongly encouraged for building owners and managers to provide fire safety education and training to all occupants as part of their overall emergency preparedness efforts. This training may include:

1. General fire prevention tips, such as appropriate use of smoking materials, proper disposal of flammable materials, and electrical safety practices.
2. Explanation of the building’s emergency evacuation procedures, including evacuation routes, assembly points, and the use of fire alarms and extinguishers.
3. Instruction on how to respond to a fire emergency, including when to evacuate immediately, when to shelter in place, and how to help others in need.
4. Training on the operation of fire safety equipment, such as fire extinguishers and fire suppression systems, if applicable to the building.

While specific training requirements for building occupants may not be mandated by law in Arkansas, promoting fire safety awareness and preparedness among occupants can help mitigate risks and improve overall safety in the event of a fire emergency.

16. How are high-rise buildings regulated in terms of fire safety in Arkansas?

In Arkansas, high-rise buildings are regulated in terms of fire safety primarily through the state’s fire safety codes and regulations. These codes are enforced to ensure the safety of occupants and firefighters in the event of a fire emergency in a high-rise structure.

1. Building Design and Construction: High-rise buildings in Arkansas must adhere to specific design and construction requirements outlined in the state building codes, including fire-resistant materials, adequate means of egress, and fire protection systems such as sprinklers and fire alarms.

2. Fire Protection Systems: High-rise buildings are required to have fire protection systems in place, including automatic sprinkler systems, fire alarms, smoke control systems, and fire extinguishers. These systems are designed to detect and suppress fires in their early stages and alert occupants to evacuate safely.

3. Regular Inspections and Maintenance: High-rise building owners are responsible for ensuring that all fire protection systems are regularly inspected, tested, and maintained in compliance with state regulations. This includes conducting annual fire drills to practice evacuation procedures and ensure the readiness of occupants in the event of a fire.

4. Occupant Safety and Education: High-rise building owners are also required to provide fire safety education and training to occupants, including information on emergency procedures, evacuation routes, and the proper use of fire protection equipment. This helps to ensure that occupants are prepared to respond effectively in the event of a fire emergency.

Overall, high-rise buildings in Arkansas are subject to stringent fire safety regulations to protect the lives and property of occupants and to prevent the spread of fires in these tall structures. Compliance with these regulations is critical to ensuring the overall safety and security of high-rise buildings in the state.

17. Are there specific regulations for fire safety in residential buildings, such as apartments and condos in Arkansas?

Yes, there are specific regulations for fire safety in residential buildings, including apartments and condos, in Arkansas. These regulations are outlined in the Arkansas Fire Prevention Code, which provides guidelines for fire safety measures to be implemented in residential buildings to protect occupants from fire hazards. Some of the key regulations that apply to residential buildings in Arkansas include:

1. Installation of smoke detectors: Arkansas regulations typically require the installation of smoke detectors in residential buildings, including apartments and condos. These smoke detectors should be located in bedrooms, hallways, and common areas to ensure early detection of fires.

2. Fire extinguishers: Residential buildings in Arkansas are often required to have fire extinguishers placed in easily accessible locations to allow for quick response in case of a fire emergency.

3. Exit routes and signage: Regulations also dictate the requirement for clear exit routes in residential buildings, including proper signage to guide occupants to safety in the event of a fire.

4. Building materials and construction: There are specific regulations regarding the type of building materials used in residential construction to enhance fire resistance and prevent the spread of fire within the building.

5. Electrical safety: Regulations in Arkansas also cover electrical safety measures to prevent electrical fires in residential buildings, such as proper wiring and maintenance practices.

Overall, these regulations are in place to ensure the safety of residents living in apartments and condos in Arkansas and to mitigate the risks associated with fire emergencies in residential buildings.

18. What are the guidelines for fire safety in educational institutions, such as schools and universities, in Arkansas?

In Arkansas, fire safety guidelines for educational institutions, such as schools and universities, are outlined in accordance with the State Board of Education Rules. These guidelines require educational institutions to comply with the Arkansas Fire Prevention Code, which includes regulations for fire alarm systems, fire extinguishers, emergency exits, and electrical safety. Additionally, educational institutions are mandated to have an emergency response plan in place, conduct regular fire drills, and provide fire safety training to staff and students.

1. Fire Alarm Systems: Educational institutions in Arkansas must have fully operational fire alarm systems installed throughout the premises. These systems should be regularly tested and maintained to ensure they are in working condition.

2. Fire Extinguishers: Adequate fire extinguishers must be strategically placed in accessible locations throughout the educational institution. These fire extinguishers should be the appropriate type for the potential fire hazards present in the specific area.

3. Emergency Exits: All educational institutions must have clearly marked emergency exits that are unobstructed and easily accessible. Regular inspections should be conducted to ensure these exits are functioning properly.

4. Electrical Safety: Electrical systems within educational institutions must be regularly inspected to prevent potential fire hazards. Proper wiring, adequate electrical load capacity, and adherence to electrical safety codes are essential.

5. Emergency Response Plan: Each educational institution should have a comprehensive emergency response plan in place, outlining procedures for evacuations, communication during emergencies, and coordination with local emergency services.

6. Fire Drills: Regular fire drills should be conducted to ensure that students and staff are familiar with evacuation procedures and can respond effectively in the event of a fire emergency.

7. Fire Safety Training: Staff and students should receive fire safety training to increase awareness of fire hazards, proper evacuation procedures, and the proper use of fire safety equipment.

By following these guidelines and regulations, educational institutions in Arkansas can create a safe environment for students, staff, and visitors, reducing the risk of fire-related incidents and ensuring a prompt and effective response in case of an emergency.

19. Can you explain the specific requirements for fire safety in healthcare facilities in Arkansas?

In Arkansas, healthcare facilities are subject to specific fire safety requirements to ensure the safety of patients, staff, and visitors. These requirements are typically outlined in the Arkansas Fire Prevention Code, which incorporates the National Fire Protection Association (NFPA) standards specific to healthcare facilities. Some of the key requirements include:

1. Fire alarm systems: Healthcare facilities are typically required to have a monitored fire alarm system that provides both audible and visual notifications in the event of a fire. The system must be regularly inspected, tested, and maintained to ensure proper functioning.

2. Fire suppression systems: Healthcare facilities may be required to have fire suppression systems, such as automatic sprinklers, in areas where the risk of fire is high, such as kitchens or mechanical rooms. These systems must also be inspected and maintained regularly.

3. Egress requirements: Healthcare facilities must have clear and unobstructed means of egress in case of a fire emergency. This includes properly marked exit routes, emergency lighting, and adequate exit signage.

4. Fire drills and training: Healthcare facilities are typically required to conduct regular fire drills and provide fire safety training to staff to ensure they know how to respond in case of a fire.

5. Fire safety plans: Healthcare facilities are often required to develop and maintain comprehensive fire safety plans that outline emergency procedures, evacuation routes, and protocols for communicating with emergency responders.

Overall, the specific requirements for fire safety in healthcare facilities in Arkansas aim to minimize the risk of fire-related injuries and deaths and ensure a prompt and effective response in case of a fire emergency. It is important for healthcare facility managers and staff to stay informed about these requirements and work closely with fire safety professionals to ensure compliance.

20. How often should fire safety equipment be inspected and maintained in Arkansas buildings according to the fire safety codes?

According to the fire safety codes in Arkansas, fire safety equipment should be inspected and maintained regularly to ensure it is fully functional in case of an emergency. The specific frequency of inspections and maintenance can vary based on the type of equipment and its intended use within a building. However, a general guideline is as follows:

1. Fire alarms: Fire alarms should be inspected and tested at least once a year by a certified professional to ensure they are working properly and can effectively alert occupants in the event of a fire.

2. Fire extinguishers: Fire extinguishers should be visually inspected monthly by building occupants to ensure they are in their designated locations and have not been tampered with. Additionally, they should be professionally inspected and serviced annually to ensure they are fully charged and ready for use.

3. Emergency lighting: Emergency lighting systems should be tested monthly to ensure they will activate in the event of a power outage or fire. Annual professional inspections are also recommended to ensure the system is functioning correctly.

4. Exit signs: Exit signs should be inspected regularly to ensure they are illuminated and clearly visible. Any signs that are damaged or not working should be repaired or replaced promptly to ensure safe egress during an emergency.

By adhering to these inspection and maintenance schedules, building owners and managers can help ensure the safety of occupants and compliance with fire safety codes in Arkansas.